Zilog Z16C35 Uživatelský manuál Strana 280

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 322
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 279
Application Note
Boost Your System Performance Using The Zilog ESCC
13-13
1
MODIFIED WRITE TIMING
In the SCC write cycle, the SCC assumes the data is valid
when /WR is asserted (Figure 15). This assumption is not
valid for some CPUs, e.g., the Intel 80X86. The /WR signal
from this CPU needs to delay for one more clock to initiate
the write cycle. Additional hardware is required.
In the ESCC, write cycle timing has been modified so that
data becomes valid a short time after write (approx. 20 ns).
Therefore, if the data pins from the Intel CPU are
connected directly to the ESCC, no additional logic is
required.
Figure 15. Modified Write Timing
/WR
SCC
ESCC Databus Valid
Databus Valid
SCC Spec:
WR Fallin
g
Databus V
a
Minimum
ESCC Spec:
Databus Valid to WR Fallin
g
Databus latched after falling edge of WR saves external logic required
to delay WR until databus is valid. Typically needed with Intel CPUs.
2
9
2
9
Page 274 of 316
UM011002-0808
Zobrazit stránku 279
1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 321 322

Komentáře k této Příručce

Žádné komentáře