Zilog Z80180 Uživatelský manuál Strana 112

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 326
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 111
Z8018x
Family MPU User Manual
UM005003-0703
97
DMA Mode Register (DMODE)
DMODE is used to set the addressing and transfer mode for channel 0.
0DMER DMA Main Enable — A DMA operation is only enabled
when its DE bit DE0 for channel 0, DE1 for channel 1)
and the DME bit are set to 1.
When NMI occurs, DME is reset to 0, thus disabling
DMA activity during the NMI
interrupt service
routine. To restart DMA, DE0 and/or DE1 must be
written with 1 (even if the contents are already 1).
This action automatically sets DME to 1, allowing
DMA operations to continue. DME cannot be
directly written. It is cleared to 0 by NMI
or
indirectly set to 1 by setting DE0 and/or DE1 to
1.DME is cleared to 0 during RESET.
DMA Mode Register (DMODE: 31H)
Bit 76543210
Bit/Field ? DM1 DM0 SM1 SM0 MMOD ?
R/W ? R/W R/W R/W R/W R/W ?
Reset ? 0 0 0 0 0 ?
Note: R = Read W = Write X = Indeterminate ? = Not Applicable
Bit
Position Bit/Field R/W Value Description
5
4DM1:0R/W Destination Mode Channel 0 — Specifies whether the
destination for channel 0 transfers is memory, I/O or
memory mapped I/O and the corresponding address
modifier. Reference Table 12.
Bit
Position Bit/Field R/W Value Description
Zobrazit stránku 111
1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 325 326

Komentáře k této Příručce

Žádné komentáře