
The Z8 Encore! XP
®
F6482 Series Development Kit UM026301-1013
8
Z8 Encore! XP
®
F6482 Series Development Kit
User Manual
4. With the USB A (male) to Mini-B cable, connect Port P1 on the F6482 Series Devel-
opment Board to a USB port on the development PC to apply power to the Develop-
ment Board, as highlighted in Figure 5.
Start the Z8F6482 Demonstration Program
The F6482 Series Development Kit includes a sample program that demonstrates a blink-
ing LED application. Any terminal emulation program used must be configured for
57600-8-N-1 with no flow control, as described in the HyperTerminal Configuration
sec-
tion on page 12. To get started with the Z8F6482 demonstration, observe the following
procedure.
1. Launch ZDS II by navigating from the Windows Start menu to
Programs → Zilog
ZDS II – Z8 Encore! <version>
→ ZDS II – Z8 Encore! <version>.
2. From the File menu in ZDS II, select
Open Project as shown in Figure 6, and navigate
via the following filepath.
<ZDS Install>\samples\XP_F6482\XP_F6482_LedBlink_C
Figure 5. Power Supply Port P1 Connector
Komentáře k této Příručce